Omada by TP-Link AX3600 dual-band WiFi 6 outdoor access point with PoE, 10G SFP+ and IP68 protection

Technical Specifications

• Omada by TP-Link AX3600 Dual-Band WiFi 6 Access Point for Indoor and Outdoor Use
• IEEE 802.11a/b/g/n/ac/ax wireless standards
• Combined wireless speed of up to 3550 Mbps
• Speed of up to 1,148 Mbps on the 2.4 GHz band
• Speed of up to 2,402 Mbps on the 5 GHz band
• Connection capacity for up to 1,024 wireless clients, depending on usage conditions
• 4 external omnidirectional dual-band antennas with 6 dBi gain at 2.4 GHz and 5 GHz
• CE transmission power less than 20 dBm at 2.4 GHz, less than 23 dBm in 5 GHz bands 1 and 2, and less than 30 dBm in 5 GHz band 3
• 4x4 MU-MIMO technology for both uplink and downlink
• Uplink and downlink OFDMA technology
• 1024-QAM modulation
• Integrated LTE filter

Functionalities

• Omada Mesh technology to extend wireless coverage via a mesh network
• Seamless Roaming with 802.11k/v/r standards to facilitate roaming between access points
• Beamforming to optimize wireless transmission to connected devices
• Band Steering to distribute clients between the 2.4 GHz and 5 GHz bands
• Load Balancing to distribute client traffic evenly among access points
• Airtime Fairness to optimize the distribution of wireless transmission time
• Up to 16 SSIDs, with 8 SSIDs per band
• Guest network
• Automatic channel assignment
• Transmission power control
• Quality of Service (QoS) via WMM
• Speed Limiting by SSID or Client
• Enabling and disabling the wireless radio and SSID broadcast
• Scheduled wireless network operation and reboots
• Wireless performance statistics
• VLAN support
• Captive portal authentication
• MAC authentication and RADIUS accounting
• Filtering of up to 4,000 MAC addresses
• Wireless isolation between clients
• Detection of unauthorized access points (rogue APs)
• WPA-Personal/Enterprise, WPA2-Personal/Enterprise, and WPA3-Personal/Enterprise encryption

Communication interface

• Bluetooth connectivity
• Reset button

Network

• 1 2.5 Gbps RJ45 Ethernet port with PoE input
• 1 Gigabit RJ45 Ethernet port with PoE output
• 1 10 Gbps SFP+ slot for Lens fiber connection via a compatible module
• Centralized management via the Omada SDN platform
• Compatible with Omada Software Controller, Omada Hardware Controller, and Omada Cloud-Based Controller
• Remote access and management via the Omada cloud
• Compatible with the Omada app
• Management via web interface
• SNMP v1, v2c, and v3 management protocols
• Administrative access via SSH
• Static or dynamic IP address configuration
• Time synchronization via NTP
• System event logging
• Email alerts
• MAC address-based access control for administration
• Control over turning LED indicators on and off
• Configuration backup and restore functions
• Firmware updates via web interface

Power

• Power via IEEE 802.3at PoE+ or IEEE 802.3bt PoE++
• PoE input via the 2.5 Gbps Ethernet port
• PoE output via the Gigabit Ethernet port, available with IEEE 802.3bt input power
• IEEE 802.3af PoE output with IEEE 802.3bt Type 3 input
• IEEE 802.3at PoE output with IEEE 802.3bt Type 4 power input
• PoE output disabled when the device receives IEEE 802.3at power
• Maximum power consumption of 20.2 W for the European version, excluding power supplied by the PoE output

Environmental

• Designed for indoor and outdoor operation
• IP68 protection against dust and water
• Lightning and surge protection up to 6 kV in common-mode
• Protection against electrostatic discharge up to ±8 kV in air and ±4 kV by contact
• Operating temperature range: -40°C to +70°C
• Operating humidity from 10% to 90% non-condensing
• Storage temperature: -40°C to +70°C
• Storage humidity from 5% to 90% non-condensing

Physical Characteristics

• Upper housing made of polycarbonate reinforced with 10% glass fiber (PC+GF10%)
• Aluminum alloy lower housing
• Mounting bracket made of SGCC steel
• Wall or pole mounting using the included mounting kits
• Horizontal adjustment of ±45° with the included mounting system
• Compatible with the optional APM-110 bracket for ±90° vertical and ±45° horizontal adjustment (not included)
• Compatible with the optional APM-100 bracket for ±45° vertical and ±45° horizontal adjustment (not included)
• Dimensions: 312 x 240 x 80 mm, excluding antennas, mounting accessories, and waterproofing
• Net weight: 2.7 kg

Contents

• 1 Omada by TP-Link TPLINK-315 Wi-Fi 6 access point (EAP668-Outdoor HD)
• 4 external dual-band omnidirectional antennas
• Mounting kit
• Waterproofing kit
• Installation guide

Certifications and Standards

• CE and FCC certifications
• RoHS Compliance